What are the precautions for LPG skid station?

1. The LPG skid station must be arranged in a safe location. The fire separation distance between the station and roads, buildings, transmission lines, etc. should meet the specifications.

2. The fire-fighting equipment installed in the LPG skid station should meet the requirements of the local management department of the user, and the specific device should be purchased by the user.

3. During installation and construction, it is necessary to avoid damaging the anti-corrosion coating of the equipment.

4. Electrical wiring and anti-static wiring should be tightened.

5. After the construction is completed, compressed air or nitrogen should be used for airtightness testing of the storage tanks and pipeline systems in the LPG skid station. The pressure should be the design pressure of the storage tank and pipeline system respectively.

6. Before filling with LPG, the skid station should replace the system with nitrogen or vacuum to completely exhaust the air inside the system.

7. Electrical lines should be installed and checked before power transmission, and incorrect connections are strictly prohibited.

8. Operators should receive equipment condition and operation training before starting work. Operators must master the structure, principle, and operation process of the entire set of equipment in the liquefied petroleum gas skid station, as well as the structure, principle, and operation essentials of gas dispensers, pumps, valves, etc.

9. The operator's clothing must meet the requirement of no static sparks.

10. Each part of the LPG skid station should have a canopy for shading.

11. The sprinkler system should be connected to a reliable water source in order to provide timely cooling for the storage tank.